หน้าแรก|ติดต่อเรา|เกี่ยวกับเรา|โปรโมชั่น|วิธีการสั่งซื้อ|เว็บลิงค์|Site Map
หน้าแรก
เครื่องเสียงหลอด
หลอดสูญญากาศ
ซอกเก็ตหลอด
ตัวเก็บประจุ
ตัวต้านทาน
ขดลวด
สร้างเครื่องเสียงหลอด
วงจรเครื่องเสียงหลอด
สร้างลำโพง
มุมนักกีต้าร์
Volumn Alps
Plug and Outlet
ติดต่อเรา
เกี่ยวกับเรา
สินค้าแนะนำ
Audyn-Cap Plus
Audyn-Cap Plus

เมนูสินค้า
COPPER FOIL INDUCTOR
COPPER FOIL INDUCTOR


Tube Zipper
Tube Zipper


Audience Auricap
Audience Auricap


Obbligato
Obbligato


Low Voltage Regulator
Low Voltage Regulator


ผู้ชมออนไลน์
ขณะนี้มี 22 บุคคลทั่วไป ออนไลน์

counter 
                                           

หน้าแรก arrow Vacuum Tube

เลือกซื้อ

JJ Hi-end electron tube Technology
All materials used in the manufacturing of our tubes comply with the most stringent quality requirements.
In tube manufacturing, the fundamental requisite for the best production results is to maintain as high mechanical precision for assembly as possible. JJ Electronic uses assembly precision of no more than ? 0.02 mm.
  
Before they are assembled, all parts are thoroughly cleaned using such methods as the ultrasonic bath, chemical cleaning or annealing in an inert gas atmosphere (hydrogen, nitrogen).
   
A thorough inspection is performed on every component of the tube internal system before assembly. Assembled systems are then sent to sealing in a glass envelope. During the sealing procedure, the temperature of the glass pass-through joints must be controlled and joints are gradually tempered to relieve the inherent thermal stress.
   
Next, the assembled glass envelopes are evacuated by mechanical and diffusion vacuum pumps. During this process, the cathode emission coating is activated. All internal parts are heated by a high frequency heater and any spurious dust particles are evacuated. Finally, the getter rings are activated, while they absorb any residual gas inside the glass envelope of the tube.

Every tube is then electrically tested for all parameters which are the key to a flawless operation and a great sound. Specifically, these parameters include: leakage characteristics, internal vacuum level, cathode emission capability, filament voltage and current, anode current saturation level, microphony and others.


เรียงลำดับ:


แสดง #  
  • Thai
  • English

มาใหม่แล้วครับ รุ่น Sliver Gold Z-cap สุดยอดอีกระดับจาก JantzenAudio, Denmark  แนวเสียงสไตล์ Audiophile สดใส ปลอดโปร่ง ครบถ้วนทุกรายละเอียด

Obbilgato Copper case, 0.33uF มาแล้วครับ

Electro Harmonix : 6922 Gold Pins, 6CA7 Big Bottle

Sovtek : 2A3

JJ Tesla : EL34, 300B, EL84

Svetlana: EL34

Tungsol: 12AX7, EL34B มาแล้วครับ

ขณะนี้ทางร้านได้เปลี่ยนเบอร์โทรศัพท์เพื่อการติดต่อที่ดีขึ้น จาก 081-734 3545 เป็น 087-497 9898. ส่วนemail ยังเหมือนเดิมคือ อีเมลนี้จะถูกป้องกันจากสแปมบอท แต่คุณต้องเปิดการใช้งานจาวาสคริปเพื่ออ่านมันได้

เวลาทำการ 8โมงเช้า ถึง 6โมงเย็น จันทร์-เสาร์ หยุดวันอาทิตย์

Currently, we have changed the contact phone number from 081 7343545 to 087 497 9898 for a better service. The contact email address remains the same อีเมลนี้จะถูกป้องกันจากสแปมบอท แต่คุณต้องเปิดการใช้งานจาวาสคริปเพื่ออ่านมันได้

Operating hours: 8:00 - 18:00 Hrs. Mon-Sat.  Closed on Sunday.

Upgrade เครื่องเสียงหลอดโดย

High Voltage regulator                Low Voltage regulator 

 

           

 

   

______________________________________________

 

Audyn-Cap Plus
Audyn-Cap Plus
12AU7 EH Gold Pin
12AU7 EH Gold Pin
Audyn- KPSN
Audyn- KPSN
300B EH GOLD Grid Matched Pair
300B EH GOLD Grid Matched Pair
Low Voltage Regulator
Low Voltage Regulator
COPPER FOIL INDUCTOR
COPPER FOIL INDUCTOR
suvarnbhumiaudio  suvarnbhumiaudio

suvarnbhumiaudio  suvarnbhumiaudio   

suvarnbhumiaudio

suvarnbhumiaudio

suvarnbhumiaudiosuvarnbhumiaudio

suvarnbhumiaudio suvarnbhumiaudio

suvarnbhumiaudio

สินค้าล่าสุด
COPPER FOIL INDUCTOR
COPPER FOIL INDUCTOR

Audyn-Cap Plus
Audyn-Cap Plus

Alps Volumn
Alps Volumn

© 2012 “We have a passion to create great audio experiences”
suvarnabhumiaudio
Copyright All rights reserved."